|
| TS/i.LINK Converter |
| For PDF Brochure, please click here. |
| The TI-5105 performs interface conversions between MPEG2 Transport Stream signals (DVB-ASI/SPI) to i.LINK and from i.LINK to DVB-ASI. It enables easy mutual conversion between i.LINK, which has been adopted by HDV-standard VTR decks and cameras, D-VHS, and DVB-ASI/SPI used in digital broadcasting systems. |
|
|
| Features |
|
TS (DVB-ASI/SPI) conversion to IEEE1394
- Transport Stream (TS) input signal (DVB-ASI/SPI) is converted to i.LINK (IEEE1394) in real time.
- A variety of formats are accepted under the TS signal and outputted as IEEE1394.
- A copy control function (compliant with DTCP standards) can be added when IEEEE1394 is outputted.
- TS (DVB-ASI/SPI) signals can be analyzed and displayed.
i.LINK (IEEE1394) conversion to TS (DVB-ASI/SPI)
- i.LINK (IEEE1394) signals, which are fully compliant with IEC61883-4 standards, are converted to TS (DVB-ASI).
- The bit rate of the TS signals can be set from 100 Kbps to 60 Mbps.
- Any format can be selected for the output signal (DVB-ASI/SPI).
- The information of the TS (DVB-ASI/SPI) to be outputted via IEEE1394 can be analyzed and displayed.
- Settings can be stored, even after powering off, to be used the next time the unit is powered up.
- The unit can be powered by a DC 12V add-on (optional) to be used in portable applications such as working out of a vehicle.
|
|
SPECIFICATIONS
|
| Transport Stream Input / Output |
| DVB-ASI Input 75 Ohm (BNC x1) |
100 kbps ~ 60 Mbps |
| DVB-ASI Output 75 Ohm (BNC x1) |
100 kbps ~ 60 Mbps |
| DVB-SPI Input / Output D-Sub 25 pin x1
(used exlcusively for input and output)
|
100 kbps ~ 60 Mbps |
| IEEE1394 Input / Output |
| IEEE1394 Statndard (Compliant with IEC61883-4) |
4 pin IEEE1394 connector x 1 system |
| General Specifications |
| Supply Voltage |
AC 100 to 240V, 50/60 Hz |
| Dimensions |
210 (W) x 44 (H) x 280 (D) mm
( 8.3" x 1.7" x 11.0": 1U half size)
|
| Weight |
Approx. 1.7 kg (3.7 lbs) |
|
|
|
